Products
Casting Mill Rolls
We develop Honsin Mill Rolls Solution to help our customer to have the best rolling experience. We believe a single roll quality may not always be suitable for all stands in a rolling mill. We can help in designing and using the best and most suitable...
Centrifugal Casting Definite Chilled Cast Iron Roll
Centrifugal Casting Definite Chilled Cast Iron Roll
The rolls exhibit improved mechanical properties due to presence of chilled surface structure and the change of pine-tree-like structure . The hardness and type of matrix of roll depend on conditions...
Centrifugal Casting Alloy Indefinite Chilled Roll
Centrifugal Casting Alloy Indefinite Chilled Roll
The outer layer exhibits a remarkable mechanical performance and the quantity of graphite in the roll work layer remains basically unchanged along the depth, producing therefore no adverse effect...
Centrifugal Casting High Chrome Roll
Centrifugal Casting High Chrome Roll
Thanks to its high content of M7C3, type carbide in range of 20-30% and discontinuous network distribution of carbide, the roll offers a high wear resistance performance. The matrix is finely-disseminated secondary...
Centrifugal Casting High Speed Steel Roll
Centrifugal Casting High Speed Steel Roll
The outer layer is a complicated carbide structure of high-carbon steel alloys containing Cr、Mo、W、V、Ni and Nb, which is inlaid into the martensite structure. Through control of carbon control and compreh...
Centrifugal and Static Casting Steel Base Adamite Roll
Centrifugal and Static Casting Steel Base Adamite Roll
Its micro-structure is composed of matrix and carbide with carbon content of 1.3-2.3%,depending on content of alloy and heat treatment process. The matrix consists of pearlite and bainite, w...
Spheroidal Graphite Cast Iron Roll
Spheroidal Graphite Cast Iron Roll
Thanks to its higher content of Ni and Mo alloys, pearlite, basinite and martensite matrixes with excellent performance are produced. The graphite si spherical form, demonstraing good heat transfer property and...
Forged Mill Rolls
We develop Honsin Mill Rolls Solution to help our customers to have the best rolling experience. Our forged rolls are made from major forged steel with 2%/3%/5% Chrome content. The forged blank is ESR garde with forged ration superior than 3. Our products...
Forged Working Rolls
Forged working rolls
Forged steel working roll performs as a tool to transform materials under normal room temperature. It is the most wear and tear spare parts during the rolling process. By using 2%Cr,3%Cr,5%Cr materials series, Honsin rolls s...
Forged Intermediate Rolls
Forged intermediate rolls
Forged steel intermediate roll applies to high precision 6-Hi(as well as a few 8 Hi) mills. its name is from the working location between working roll and back-up roll. The intermediate rolls are mainly used to control...
Forged Back Up Rolls
Forged Back up rolls
Forged steel back-up roll is mainly used in 4 Hi and 6 Hi mills.The diameter of roll barrel can be 350mm - 1600mm. The materials of back-up include 9Cr2Mo, 86CrMoV7, 70Cr3Mo and 45Cr5NiMoV.
Hardness Curve of Back up...
Tungsten Carbide Roller
Cemented carbide roll ring, also known as Tungsten carbide roll ring, possesses very good thermal conductivity property. Under the condition of high temperature, compared to other materials, the hardness keeps stable and it provides much better heat...
Ceramic Rolls for furnace
Ceramic Rolls for high temperature furnace
Other ceramic rolls are available with the materials below :
Honsin Ceramic Roll® Series- Fused Silica Ceramic Roller (Presentation below)
Honsin Ceramic Roll® Series- Alumina Ceramic R...
Furnace Roll
Furnace Rolls
Furnace rolls convey steel sheet in high-temperature environment. These rolls are designed and built to be used inside the furnace.
Honsin standard Furnace rolls are designed to have excellent heat, anti-corrosion and wear-resistant...
Package Printing Rolls
Honsin Industry as a rolls research and production specialist offers a large range for carton packing, printing, plastics, leather and other related industries.
We have severed successfully both domestic and international customers and now becomes one...
Graphite Electrode
Continuous development in Electric Arc Furnaces (EAF) & Ladle Technology has led to the need of Graphite Electrodes of very stringent quality. The common requirements remain better consumption norms and least electro mechanical...
Graphite Crucible
Honsin Industry Graphite Crucibles Solution:
The crucible is a utensil or melting tank vessels that is made of refractory material (such as clay, graphite, clay, quartz or difficult molten metal iron, etc.).
Honsin Industry is specialized in high...
Isostatic Graphite Blocks & Rounds
Formed by means of CIP (cold isostatic pressing) technique, isostatic graphite is characterized by its homogeneous structure and excellent isotropic electrical, thermal and mechanical properties. Sometimes it is purified in special-designed graphitization...
Specialty Graphites
Graphite has the properties of electric and thermal conduction which belongs to metallic material. But also it has plasticity, thermal resistance, chemical stability and lubricating ability. These properties make Graphite material able to satisfy very...
Refractory Products
Because we know each single refractory part is playing a capital role in the whole production process. We spend time to have a accurate "picture" of our customers’ production and furnaces conditions. Our engineers continuously help each customer to s...
EAF Refractory
Refractory products for EAF application
Magnesia Carbon Brick
Magnesia carbon brick formed by fused magnesite, high-purity magnesium sand and graphite through high-pressure molding and low-temperature treatment.
This product is mainly used for EAF lining, presents advantages as high temperature resistance...
Taphole Block
Taphole block is molded at isostatic pressure with fused magnesia and graphite as raw material. It is characterized by strong oxidation resistance, high strength and high corrosion resistance. It is ideal material for taphole of large and medium furnaces....
Ramming Mass
Honsin Group Ramming Mass for EAF is characterized by :
high corrosion & erosion resistance against molten steel and slag
good sintered Layer
good service life
It is a ideal EAF furnace repair maintenance and construction solution...
Gunning Mix
Honsin Group EAF gunning mix is made by magnesia / magnesia-calcium material. It is characterized by high bonding strength, good corrosion resistance and non-spalling. When the work temperature is higher than 1000℃, it works well and the adhesion r...
Delta Sections EAF
Honsin designs and supplies delta sections for EAF which is made by castables to increase the work life. We supply these delta sections in our assembly parts plant under customer’s specifications or according to our own design and provide specific d...
Filling Sand
Filling Sand is filler which is used in EAF taphole. Honsin Group designs and supplies it for EBT to molten steel flow control.
Typical product characteristics tables :
Brand
HSCG-1
HSCG-2
Chemical composition/%,≥
...
Ladle Refractory
Refractory products for Ladle application
Magnesia Alumina Carbon Brick
Magnesia Alumina Carbon Brick / Alumina Magnesia Carbon Brick / Magnesia Calcium Brick
Magnesia alumina carbon bricks with high grade magnesite, corundum, spinel and graphite as raw materials, bonded by resin, are characterized by good slag resistance, ...
Magnesia Carbon Brick for Ladle
Magnesia carbon brick with fused magnesite, high purity magnesite and graphite as raw materials, pressed at high pressure and treated at low temperature, this product characterized by high strength, erosion and spalling resistance. It is mainly u...
Magnesia Chrome Bricks
Honsin series of magnesia-chrome bricks are composite basic refractory products, made by magnesite and chromite which are burned at high temperature or ultra-high temperature. The products show the features of excellent resistance against slag, high...
Ladle Castables
Ladle castables are produced from corundum aluminum magnesia spinel and fused magnesite. Honsin Group develops the micro-power technology and additive agent for a high performance quality, which is characterized by :
good construction function ...
Ladle Gunning Mix
Ladle gunning mixer with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebound rate, easy sintering, good corrosion and erosion resistance. This product is ideal material...
Self-flow Castables
Self-flow castables (SFC) is a innovative castable. It can be applied in all areas where applications require low cement, ultra-low cement and non-cement castables. Both mullite based Self-flow castables and alumina-based ones can be applied for the ...
Lower Nozzle and Upper Nozzle
Lower Nozzle
Honsin series of lower nozzles for ladle are made from corundum, bauxite, flake graphite, antioxidant and phenolic resin.They are characterized by excellent thermal shock resistance, stable performance, good excellent corrosion and e...
Ladle Nozzle Well Block
Honsin series of well blocks for nozzles are made from high-purity, high-density, high-strength materials. They show the features of stable structure, excellent thermal shock resistance, good corrosion/erosion resistance and long service life
Typical...
Ladle Slide Plates
The Alumina-carbon slide plates show the feature of lower percentage of carbon content, which will avoid the working surface of slide plates from being greatly roughened.
They are suitable to both low-carbon and super-low-carbon steel grades. Honsin ...
Ladle Purging Plugs
HST series of purging plugs
Made from high-purity, high-density, high-strength corundum based materials and matrix-adjusted system(MAS), HST series of purging plugs, with the unique radiated through-slots structure, show the features of stable...
Tundish Refractory
Refractory products for Tundish application
Mono Block Stopper (Stopper rod)
Honsin Group develops multiples kinds of stoppers by selecting different raw materials properties :
aluminum carbon based,
aluminum-zirconium carbon based
aluminum-magnesia carbon based.
Our products perform well in very strict conditions ...
Ladle Shroud
Honsin Group supplies different categories Ladle Shroud such as :
reheating type
non-preheating type
argon blowing type and not argon blowing type
Different kinds of materials have been rigorously selected, tested to offer our customers ...
Submerged Entry Nozzle
Honsin Group supplies different categories submerged entry nozzles such as :
plug-in type
hanging type
fast changing type
Different kinds of materials have been rigorously selected, tested to offer our customers the most adapted solution ...
Zirconia Metering Nozzle
The Zirconia metering nozzle is specially used for the Tundish gating system without plug stick in the small square-base continuous casting machine. It is perfectly adapted with multi-thread and small square-base continuous casting machine.
All our...
Tundish Slag Dam and Impact Plate
Tundish Slag Dam
The Tundish slag dam is an auxiliary product in the Tundish. It is used to separate slag, prevent slag going into moulds and improve steel quality. This product is characterized by good erosion resistance, high-temperature stability. Our e...
Tundish Well Block
Selected from high-quality raw materials with rigorous production process. Honsin Group Tundish well block can be used with multiples kinds of Tundish nozzles.
Our Tundish well block shows excellent strength, high thermal shock stability and erosion...
Tundish Castable
Honsin Group Tundish castable is formed with extra alumina as the principal raw material. It is characterized by the stability of heat and shock resistance, high strength without chipping.
Typical product characteristics tables :
Item
...
Dry Vibration Mix
This product is mainly used for Tundish lining. It is characterized by easy usage. It allows to prevent molten steel from refractory pollution efficiently. Without adding water during the installation, construction time is dramatically reduced.
Typical...
Tundish Spray Mixes
Spray mixes become priority selection of Tundish working linings for lots of steel plants. By using spray mixes, continuous casting time can be extended to 25 hours or more.
Typical product characteristics tables :
Item
HSTM-1
...
Plates - Plugs - Nozzles
According to the customers’ production and furnace working conditions, we can analyze, select and supply different types of prefabricated refractory parts for different application types.
For Ladle
Description
Material
Burned s...
Copper Mould - Tube & Plate
Copper mould tube
Copper mould is placed in the heart position of continuous casting machine, its function is to solidify the liquid steel pouring through the submerged entry nozzle, and guarantees required billet, bloom, and slab with enough thick...
Foundry Sand - Ceramsite
Bauxitic Casting Pearls (also called ‘Ceramsite’ ) are innovative spherical casting sand developed in the Far East initially for the discerning Japanese markets. With the excellent casting property feedback and lower price. Ceramsite has alr...
Cored Wire
Cored wire
Cored wire provides the highest recovery rate, and increases productivity in the secondary metallurgical process.
We have wire that improves core consistency which provides an accurate core to steel percentage. The ratio of core to steel...